Once the belts in a Carlow EcoSport's 1.0 EcoBoost are replaced, every service on time to Ford's schedule keeps them in good oil. We'll pass your reg and Eircode to the approved garage covering you for a quote.
| What to watch | On an EcoSport |
|---|---|
| Oil grade | The Ford specification in your handbook for the EcoSport's 1.0 EcoBoost, such as WSS-M2C948-B on earlier engines, named on the invoice |
| How often | Every service on time to Ford's schedule |
| Invoice details | Both belts, both tensioners, the timing cover seals and the oil grade, so a later buyer can see the job was complete |
| Proof for the cover | A full service history for a Ford dealer to review, since an early failure goes to Ford through a dealer |
| Next belt change | 10 years or about 160,000 km from the last belt invoice, whichever the EcoSport reaches first |
You'll find cover terms and the engine's history in our EcoSport wet belt guide.
Carlow EcoSport enquiries reach the approved garage covering your Eircode, the same as throughout Carlow & Leinster. Each one has been vetted before it takes any work from us. The Carlow wet belt page handles other makes.
It can. Give it the belt invoice so the oil grade and change date go on the record, and if manufacturer cover might still apply, keep to the maker's schedule and check with a dealer before booking.
Your engine's interval runs from the invoice's date or km reading, whichever is reached first. The table above gives the usual interval for the EcoSport.
It needs the Ford specification in your handbook for the 1.0 EcoBoost, such as WSS-M2C948-B on earlier engines. Ask the garage to name the grade on the invoice, and use the same one for every top-up afterwards.
Ask for the quote with your reg and Eircode, and once the belts are in, keep every service on time and on paper.