Both belts in a Clonmel EcoSport's 1.0 EcoBoost run in the same oil, so the grade on every top-up matters after the change. The approved garage covering the Eircode quotes from your reg.
Clonmel EcoSport with new belts? I'd make any top-up match the grade on the invoice.
| What to watch | On an EcoSport |
|---|---|
| Oil grade | The Ford specification in your handbook for the EcoSport's 1.0 EcoBoost, such as WSS-M2C948-B on earlier engines, named on the invoice |
| How often | Every service on time to Ford's schedule |
| Invoice details | Both belts, both tensioners, the timing cover seals and the oil grade, so a later buyer can see the job was complete |
| Proof for the cover | A full service history for a Ford dealer to review, since an early failure goes to Ford through a dealer |
| Next belt change | 10 years or about 160,000 km from the last belt invoice, whichever the EcoSport reaches first |
You'll find cover terms and the engine's history in our EcoSport wet belt guide.
Clonmel EcoSports are matched by Eircode to the approved garage covering them, which is how we work in Tipperary & Munster. Our vetting looks at each garage's tools and processes. Other makes can start at our Clonmel wet belt page.
It can. Give it the belt invoice so the oil grade and change date go on the record, and if manufacturer cover might still apply, keep to the maker's schedule and check with a dealer before booking.
Your engine's interval runs from the invoice's date or km reading, whichever is reached first. The table above gives the usual interval for the EcoSport.
Yes. Give the dealer the belt invoice so the parts and oil grade are on record. Early failures go to Ford through a dealer, so a full history with the belt change in it is worth having.
Ask for a quote with the reg and your Eircode, and when you collect the car, keep the invoice with the service book.