Get a Perth EcoSport wet belt replacement quote from a vetted garage on our approved list. Petrol EcoSports with the 1.0 EcoBoost carry their cam belt in oil, and the 100, 125 and 140 PS facelift versions are no exception.
The garage can quote with fewer follow-up questions if you have these to hand.
| Version | What turns the camshafts | When it's due |
|---|---|---|
| 1.0 EcoBoost 125 petrol, 2014 to 2017 | A cam belt in oil, with an oil pump belt beside it | 10 years or 150,000 miles at launch, and today the guide is 10 years or 100,000 miles, whichever comes first |
| 1.0 EcoBoost 100, 125 and 140 petrol, 2018 to 2023 facelift | The facelift engine kept its cam belt and oil pump belt in oil | 10 years or 100,000 miles, as on the pre-facelift EcoSport |
| 1.5 Ti-VCT 112 petrol, 2014 to 2017 | A dry timing belt | Not a wet belt job |
| 1.5 TDCi and 1.5 EcoBlue diesels | A dry timing belt alongside a cam chain | Outside an EcoSport wet belt change |
Engine history and what the job involves are in our full EcoSport belt guide.
We send Perth EcoSport enquiries by postcode to an approved garage, the way we handle every enquiry from Scotland. We've vetted each garage, and it follows the correct processes for a belt in oil. Any non-EcoSport model can go through the Perth wet belt page.
It helps, but the garage can start from a reg and postcode alone. It will ask about the history as part of its quote for your EcoSport, so keep the book to hand if you can.
Put that on the form when you send it. With no invoice to prove a change, it's safest to treat the original belt as still fitted, and the garage can quote on that basis.
Use the postcode where the car is kept now. That decides which approved garage receives the enquiry, whatever address appears on an old invoice.
Add your reg, the postcode where it lives and the mileage. The approved garage quotes, and you can take your time over it.