If your Peugeot 208 is kept in Chester, the approved garage covering it can quote for its wet belt replacement. First-generation 208s built from 2012 to 2019 with a 1.0 or 1.2 PureTech petrol both run a belt in the engine oil.
Got a 208 in Chester? The reg and a postcode are all I need to get started.
The garage can quote with fewer follow-up questions if you have these to hand.
| Version | What turns the camshafts | When it's due |
|---|---|---|
| First-generation 208 (2012 to 2019) with the 1.0 VTi 68 or 1.0 PureTech 68 | The smaller EB0 PureTech, which also runs its belt in oil | The 1.0 follows the non-turbo 1.2's revised figure of 6 years or about 62,000 miles |
| First-generation 208 with a non-turbo 1.2 PureTech, 68 to 83 PS | A rubber cam belt in the oil, on a different kit from the turbo 208s | 6 years or 100,000 km (about 62,000 miles), whichever comes first |
| First-generation 208 PureTech 110 turbo, from around 2015 | A cam belt running in oil | Early 208 books print a 10-year life, replaced since by the guide figure of 6 years or 62,000 miles |
| Second-generation 208 (2019 on), PureTech 75, 100 and 130 | A belt in oil on all three | 6 years or 62,000 miles, so a 2019 208 with no belt invoice is already past the age limit |
| 208 48V Hybrid, sold in the UK from the 2024 facelift, and the 208 Turbo 100 from 2026 | A timing chain on both 208s | No wet belt on these 208s |
| 208 GT and GTi with the 1.6 THP | A chain on the four-cylinder THP | Outside a 208 wet belt job |
| Early 208s sold with the older 1.4 and 1.6 petrols | Not the PureTech belt-in-oil engine | Send the 208's reg with your quote request |
| Diesel 208, 1.6 HDi or 1.5 BlueHDi | A dry timing belt, and the 1.5's known fault is its camshaft chain | Not a 208 wet belt job |
| e-208 | Electric, with no timing belt at all | Nothing to change on an e-208 |
Engine history and what the job involves are in our full 208 belt guide.
We pair Chester postcodes with an approved garage just as we do across Cheshire, and we vet every one for correct tools and processes before it quotes on a first-generation PureTech. A second car in the household, of any make, goes through our Chester wet belt page.
It helps, but the garage can start from a reg and postcode alone. It will ask about the history as part of its quote for your 208, so keep the book to hand if you can.
Put that on the form when you send it. With no invoice to prove a change, it's safest to treat the original belt as still fitted, and the garage can quote on that basis.
It has a belt in oil too, on the smaller EB0 engine. The usual interval for that belt is 6 years or 62,000 miles, whichever comes first, so send the reg and the garage will confirm.
Add the reg, your postcode and a rough mileage. That's enough for the approved garage to quote on the 208, and booking stays your decision.