Send your reg and Eircode for a Peugeot 208 wet belt replacement quote in Drogheda from an approved garage. First-generation 208s date from 2012 to 2019, so any petrol PureTech one without a belt invoice is past the six-year guide.
The garage can quote with fewer follow-up questions if you have these to hand.
| Version | What turns the camshafts | When it's due |
|---|---|---|
| First-generation 208 (2012 to 2019) with the 1.0 VTi 68 or 1.0 PureTech 68 | The smaller EB0 PureTech, which also runs its belt in oil | The 1.0 follows the non-turbo 1.2's revised figure of 6 years or 100,000 km |
| First-generation 208 with a non-turbo 1.2 PureTech, 68 to 83 PS | A rubber cam belt in the oil, on a different kit from the turbo 208s | 6 years or 100,000 km, whichever comes first |
| First-generation 208 PureTech 110 turbo, from around 2015 | A cam belt running in oil | Early 208 books print a 10-year life, replaced since by the guide figure of 6 years or 100,000 km |
| Second-generation 208 (on sale from late 2019, PureTech 75 and 100, and the 130 on some cars) | A belt in oil on all three | 6 years or 100,000 km, so a first-year car with no belt invoice is already past the age limit |
| 208 48V Hybrid, and the 208 Turbo 100 from 2026 | A timing chain on both 208s | No wet belt on these 208s |
| 208 GT and GTi with the 1.6 THP | A chain on the four-cylinder THP | Outside a 208 wet belt job |
| Early 208s sold with the older 1.4 and 1.6 petrols | Not the PureTech belt-in-oil engine | Send the 208's reg with your quote request |
| Diesel 208, 1.6 HDi or 1.5 BlueHDi | A dry timing belt, and the 1.5's known fault is its camshaft chain | Not a 208 wet belt job |
| e-208 | Electric, with no timing belt at all | Nothing to change on an e-208 |
Engine history and what the job involves are in our full 208 belt guide.
Drogheda enquiries are matched by Eircode to the approved garage covering them, and that garage calls you with the quote. Every garage in our network has passed our vetting. For other makes, see Drogheda wet belt replacement.
It helps, but the garage can start from a reg and Eircode alone. It will ask about the history as part of its quote for your 208, so keep the book to hand if you can.
Put that on the form when you send it. With no invoice to prove a change, it's safest to treat the original belt as still fitted, and the garage can quote on that basis.
Just the reg, your Eircode and a rough km reading, plus a note that there's no belt history. The garage will then quote on the basis that the original belt is still fitted.
Reg, Eircode and a rough km reading are enough. Nothing is booked on the 208 until you've read the quote and agreed to it.