Mention any warning light or noise when you send your Longford Peugeot 208's reg for a wet belt replacement quote. Your Eircode picks the approved garage, and a 208 losing oil or showing a pressure warning gives it useful clues about the belt.
Odd noise from your Longford 208? Tell me on the form and I'll pass it on.
The garage can quote with fewer follow-up questions if you have these to hand.
| Version | What turns the camshafts | When it's due |
|---|---|---|
| First-generation 208 (2012 to 2019) with the 1.0 VTi 68 or 1.0 PureTech 68 | The smaller EB0 PureTech, which also runs its belt in oil | The 1.0 follows the non-turbo 1.2's revised figure of 6 years or 100,000 km |
| First-generation 208 with a non-turbo 1.2 PureTech, 68 to 83 PS | A rubber cam belt in the oil, on a different kit from the turbo 208s | 6 years or 100,000 km, whichever comes first |
| First-generation 208 PureTech 110 turbo, from around 2015 | A cam belt running in oil | Early 208 books print a 10-year life, replaced since by the guide figure of 6 years or 100,000 km |
| Second-generation 208 (on sale from late 2019, PureTech 75 and 100, and the 130 on some cars) | A belt in oil on all three | 6 years or 100,000 km, so a first-year car with no belt invoice is already past the age limit |
| 208 48V Hybrid, and the 208 Turbo 100 from 2026 | A timing chain on both 208s | No wet belt on these 208s |
| 208 GT and GTi with the 1.6 THP | A chain on the four-cylinder THP | Outside a 208 wet belt job |
| Early 208s sold with the older 1.4 and 1.6 petrols | Not the PureTech belt-in-oil engine | Send the 208's reg with your quote request |
| Diesel 208, 1.6 HDi or 1.5 BlueHDi | A dry timing belt, and the 1.5's known fault is its camshaft chain | Not a 208 wet belt job |
| e-208 | Electric, with no timing belt at all | Nothing to change on an e-208 |
Engine history and what the job involves are in our full 208 belt guide.
We send Longford enquiries by Eircode to the approved garage that covers them, the same way as all of Longford & Leinster. Our vetting covers every garage we use. For a car that isn't a 208, start at our Longford wet belt page.
It helps, but the garage can start from a reg and Eircode alone. It will ask about the history as part of its quote for your 208, so keep the book to hand if you can.
Put that on the form when you send it. With no invoice to prove a change, it's safest to treat the original belt as still fitted, and the garage can quote on that basis.
Stop when it's safe and don't restart the engine, because a low pressure warning can mean belt debris has reached the strainer. Have the car recovered, then send the reg and Eircode with a note about the light.
Add the reg, your Eircode, a rough km reading and any warning you've seen. From there, the approved garage for your Eircode prepares the quote.