MR.WET BELT

Peugeot 208 wet belt replacement in Salisbury

Get my free quote →

We hand your Salisbury Peugeot 208 enquiry to an approved garage that prices the wet belt replacement. The non-turbo 1.2 PureTech in first-generation 208s, rated from 68 to 83 PS, runs a rubber cam belt in oil on its own kit.

Send my 208 details

Salisbury 208? Pop the reg in and I'll do the matching.

What to have ready for a 208 quote

The garage can quote with fewer follow-up questions if you have these to hand.

  • The registration, which tells the garage exactly which engine it has
  • Your postcode, as each area has its own approved garage
  • A rough mileage
  • Any invoice showing a past belt change, with its date
  • Any warning light, noise or oil loss you've noticed lately

Belt facts for the 208

VersionWhat turns the camshaftsWhen it's due
First-generation 208 (2012 to 2019) with the 1.0 VTi 68 or 1.0 PureTech 68The smaller EB0 PureTech, which also runs its belt in oilThe 1.0 follows the non-turbo 1.2's revised figure of 6 years or about 62,000 miles
First-generation 208 with a non-turbo 1.2 PureTech, 68 to 83 PSA rubber cam belt in the oil, on a different kit from the turbo 208s6 years or 100,000 km (about 62,000 miles), whichever comes first
First-generation 208 PureTech 110 turbo, from around 2015A cam belt running in oilEarly 208 books print a 10-year life, replaced since by the guide figure of 6 years or 62,000 miles
Second-generation 208 (2019 on), PureTech 75, 100 and 130A belt in oil on all three6 years or 62,000 miles, so a 2019 208 with no belt invoice is already past the age limit
208 48V Hybrid, sold in the UK from the 2024 facelift, and the 208 Turbo 100 from 2026A timing chain on both 208sNo wet belt on these 208s
208 GT and GTi with the 1.6 THPA chain on the four-cylinder THPOutside a 208 wet belt job
Early 208s sold with the older 1.4 and 1.6 petrolsNot the PureTech belt-in-oil engineSend the 208's reg with your quote request
Diesel 208, 1.6 HDi or 1.5 BlueHDiA dry timing belt, and the 1.5's known fault is its camshaft chainNot a 208 wet belt job
e-208Electric, with no timing belt at allNothing to change on an e-208

Engine history and what the job involves are in our full 208 belt guide.

Salisbury 208 belt changes

We send Salisbury enquiries by postcode to an approved garage, the same way as across Wiltshire, and we vet every garage to make sure a non-turbo or turbo PureTech is handled correctly. A non-Peugeot in the household is quoted through our Salisbury wet belt page.

Other Salisbury wet belt pages

Peugeot 208 wet belt pages for other cities

Questions before you send your 208's reg

Do I need the service book before asking for a quote?

It helps, but the garage can start from a reg and postcode alone. It will ask about the history as part of its quote for your 208, so keep the book to hand if you can.

What if I don't know when the belt was last changed?

Put that on the form when you send it. With no invoice to prove a change, it's safest to treat the original belt as still fitted, and the garage can quote on that basis.

My Salisbury 208 is an early 1.2 without a turbo. Is the belt job the same?

It's still a belt in oil, but the non-turbo engine uses a different kit from the turbo 208s. The reg tells the garage which engine it has, so the quote is for the right parts.

Start the Salisbury quote

Three details go in the form below, and the approved garage covering you turns them into a quote for the 208's belt.

Send my 208 details