MR.WET BELT

The Ford 2.0 EcoBlue engine and its wet belt

Get my free quote →

Ford's 2.0 EcoBlue diesel first went into the Transit and Transit Custom in 2016, then into the Ranger and Ford's bigger cars. It turns its camshafts with a timing belt that runs in the engine oil. This page covers the outputs, the models, the interval history and the faults garages find. Whichever model yours is, the form below gets you a belt quote from an approved garage.

Get a quoteCheck my reg

Got a 2.0 EcoBlue? Send me the reg and I'll find a garage that knows this engine inside out.

The 2.0 EcoBlue at a glance

DetailFord 2.0 EcoBlue
FuelDiesel
First fitted2016, Transit and Transit Custom, replacing the 2.2-litre diesel
Van outputs at launch105, 130 and 170 PS
Highest output240 PS bi-turbo in the S-Max and Galaxy
Timing set-upTiming belt in oil, plus a smaller oil pump belt in oil
Ford's project namePanther

How the belt is laid out

A toothed belt at the front of the engine links the crankshaft to the camshafts, and oil washes over it all the time the engine runs. A second, smaller belt turns the oil pump, and garages renew the pair together.

Ford left a way to keep an eye on it. The back of the timing belt can be seen through the oil filler neck, and Ford, Dayco and febi all advise checking it at regular intervals.

Cars and vans with the 2.0 EcoBlue

Pick your model for years, versions and what the belt job means on that vehicle.

Model2.0 EcoBlue yearsOutputsEngine page
Transit2016 on105, 130, 170 and, from 2019, 185 PSTransit 2.0 EcoBlue guide
Transit Custom and Tourneo Custom2016 on105, 130 and 170 PS at launchTransit Custom 2.0 EcoBlue guide
RangerMid-2019 on130 and 170 PS, 213 PS bi-turboRanger 2.0 EcoBlue guide
Focus (fourth generation)2018 on150 PS, and 190 PS in the Focus ST diesel from 2019Focus 2.0 EcoBlue guide
Mondeo2019 update until production ended in 2022150 and 190 PSMondeo 2.0 EcoBlue guide
S-MaxLate 2018 on120, 150 and 190 PS, 240 PS bi-turboS-Max 2.0 EcoBlue guide
GalaxyLate 2018 on120, 150 and 190 PS, 240 PS bi-turboGalaxy 2.0 EcoBlue guide
Kuga (third generation)2020 on150 PS mild hybrid, 190 PS AWDKuga 2.0 EcoBlue guide

Ford's older 2.0 TDCi and 2.2 TDCi diesels are separate engines. If a listing or invoice just says "2.0 diesel", send the reg with your quote request and the specialist will confirm which one your car has.

How the interval has changed

The original figure

Parts maker febi lists the 2.0 EcoBlue belt at 10 years or 150,000 miles (240,000 km). That's the figure early service schedules carried.

Transit, Transit Custom and Tourneo today

Ford cut the interval for the belt, tensioner and idlers on these to 6 years or 100,000 miles (160,000 km). A 2016 van passed six years in 2022.

The cars

On the Focus, Mondeo, Kuga, S-Max and Galaxy, the usual guide is the same 6 years or 100,000 miles, whichever comes first. A Ford dealer can print the schedule for your VIN.

The Ranger

Ford hasn't published the shorter figure for the Ranger, so check Ford's schedule for the pickup's VIN before you plan the change.

The full Ford table is on our Ford interval guide.

Faults garages find on the 2.0 EcoBlue

Almost every belt problem on this engine traces back to the state of the oil.

  • Diesel reaching the sump while the particulate filter cleans itself, which Ford linked to early belt wear
  • Fragments of belt material collecting on the oil pump strainer
  • Cracks or damage on the back of the belt, seen through the filler neck
  • Faster wear on vans and pick-ups that idle a lot or only do short hops
  • Oil changes stretched past the oil life warning

On vans, Ford's 20B44 letter listed the signs of a belt letting go on the road, from a warning message to lost brake and steering assistance. Our Transit recall guide has the detail.

What a 2.0 EcoBlue belt change involves

  1. Oil check first. The garage smells the oil for diesel and looks at the strainer for belt debris.
  2. Strip the front of the engine. On the vans this means taking off the right headlamp, air filter housing and starter, and cutting away the auxiliary and water pump belts.
  3. Fit the new belts and tensioner. The timing belt and oil pump belt are both renewed, along with the slipper-type tensioner.
  4. Fit a new timing cover. Ford's thin metal cover can't be reused, so a new one goes on with fresh sealant.
  5. Fresh oil and a new filter. The engine is refilled with oil to the approval in your handbook, such as WSS-M2C950-A on the vans, and run up to check it.

We vet and approve every garage we send work to, and each one uses the right tools and procedure for this job.

2.0 EcoBlue engine questions

Is the 2.0 EcoBlue a wet belt engine?

Yes. Its timing belt and oil pump belt both run in the engine oil. Parts makers confirm this for the Transit, Transit Custom, Tourneo, Ranger, Kuga, Mondeo and S-Max versions.

Is the 2.0 EcoBlue the same as the 2.0 TDCi?

No. The 2.0 TDCi is the older diesel the EcoBlue replaced in Ford's cars, and parts or intervals for one don't carry over to the other. Your V5C or invoices will show which you have, or send the reg with a quote request and the specialist will confirm it.

Do the bi-turbo versions have the belt in oil too?

They do. The 213 PS Ranger and the 240 PS S-Max and Galaxy are still 2.0 EcoBlue engines, so the same belt questions apply. Tell the garage the output when you ask for a quote.

Can I look at the belt myself?

Part of the back of the belt is visible through the oil filler, which is the check Ford recommends. Cracks, splits or loose fibres mean it needs looking at. A garage will also smell the oil for diesel, which you can't judge by eye.

Get a quote for your 2.0 EcoBlue

Send the registration and postcode. A garage in your area that works on EcoBlue diesels will confirm the version and quote for the timing belt, oil pump belt, tensioner and oil.

Get a quote