When Citroën launched the PureTech in the C3 in 2012, it said the wet belt would last as long as the car. The advice now is 6 years or 62,000 miles, so many petrol C3s are due or past it. Send us the reg and postcode, and a specialist in your area will quote for the belt change.
Two C3 quotes can look very different if one stops at the belt. This is what a complete PureTech job on a C3 includes.
| On the quote | What it does on a C3 | What can make the job bigger or smaller |
|---|---|---|
| Belt kit | The belt in oil, with its tensioner and idler roller | Nothing extra, provided the rollers aren't reused |
| Single-use bolts and seals | Dephaser and pulley bolts, plus seals for the crank, vacuum pump and timing cover | Leaving these out saves little and risks leaks |
| Vacuum pump | Runs the brake servo and shares the engine oil | A pump with a blocked filter may need replacing, and the garage asks you first |
| Oil strainer in the sump | Catches loose pieces of belt | The sump comes off if the belt has swollen, and a fully blocked strainer means a new oil pump |
| Valve timing solenoid filters | Small filters that can clog with belt debris | Cleaning adds time on a car that's been run with a worn belt |
| Turbo oil feed | Turbo C3s only (PureTech 110) | Clearing the feed pipe adds work the non-turbo 68 and 82 don't need |
| Oil and software | Oil to Citroën's specification, and the engine software update Stellantis issued for the PureTech | Whether the garage can load the update or refers you to a Citroën dealer varies, so check when they call |
The revised PureTech interval is 6 years or 100,000 km, which is 62,000 miles. A C3 first registered in 2020 has already reached that six-year point.
It covers petrol C3s with the 1.0 or 1.2 PureTech from 2012 to 2024. The fourth-generation C3 from 2024, sold in the UK as a 1.2 Turbo 100 petrol and a Hybrid, uses a timing chain, and the 1.5 BlueHDi diesel's weak point is a cam chain. There's more on the C3's 1.2 PureTech engine.
Most C3s are back with their owners after one working day. The garage confirms the time and a booking slot with its quote, and most jobs are booked within the same week.
The C3 is often a town car, which is the use that wears a PureTech belt fastest. Watch for these.
We haven't found a UK safety recall for the C3's timing belt, and you can check your own car by reg at gov.uk/check-vehicle-recall. Stellantis does offer extended cover on qualifying engines built up to June 2022, so ask a Citroën dealer if your C3 may be eligible before booking. The conditions are set out in our Citroën wet belt guide.
The Citroën C3 wet belt replacement cost is set by the garage that does it, and it moves with what the strip-down finds in the oil system. Send us the reg and the specialist covering your area will quote for the car.
Usually one working day. A straight belt change is quicker than one where the sump has to come off, so the garage will confirm once it knows the belt's condition.
Only if the garage recommends it. The pump sits in the same oil and debris can block its filter, so the garage checks it, explains why a new one is needed and asks you first.
Usually. A planned belt change keeps a C3 on the road for years, and a failed PureTech engine can be more than a small hatchback is worth to fix.
Usually, where the garage can, since the belt job includes fresh oil anyway. It varies by garage, so ask when they call, and keep the invoice with the service record in case you ever need to make a Stellantis claim.
Give us the reg and postcode, and a PureTech specialist covering that area will work out the full job and send you a quote to look over.