MR.WET BELT

The 1.2 PureTech engine explained

Get my free quote →

Stellantis's three-cylinder 1.2 PureTech has gone into petrol cars across the group's brands since 2012. This page sets out its codes, outputs and generations, which builds carry a belt in oil, and every model it went into. An approved garage can quote for any of them once you send the reg and postcode.

Check my engineGet my free quote

Where the 1.2 PureTech came from

PSA developed the EB family as a light, low-friction three-cylinder to replace its older four-cylinder petrols. Non-turbo versions arrived in 2012, the turbocharged 1.2 followed in 2014, and Vauxhall, DS, Jeep and Toyota all took the engine after that.

The first two generations time the camshafts with a rubber belt that runs inside the engine in oil. Generation three, launched in 2023, swapped that belt for a chain, which is why the build date matters so much on this engine.

Engine codes and power outputs

The code is on the V5C or a parts listing, and it tells a garage straight away which belt kit and tools the car needs.

CodeOutputTypeTiming
EB2M, EB2 and EB2F72 and 82 PS (VTi and PureTech 82)Non-turboBelt in oil
EB2FB, EB2FA, EB2D, EB2FD and EB2FAD68, 75 and 83 PSNon-turboBelt in oil
EB2DT110 PSTurboBelt in oil
EB2DTS130 PSTurboBelt in oil
EB2ADTD100 PSTurboBelt in oil
EB2ADTX155 PSTurboBelt in oil
EB2LTEDHybrid 100 and the 2024 C3's PureTech 100Generation threeChain
EB2LTEDH2Hybrid 136 and 145Generation three, 48VChain
Turbo 100 (code not published)100 PS, from 2026Non-hybrid, mostly new partsChain

The 1.0 version, coded EB0, has its own engine guide.

Why the build date decides belt or chain

Badges don't help much here. A 2024 Peugeot 208 can leave the showroom with either a belt-in-oil PureTech 100 or a chain-timed Hybrid, and both say 1.2 on the back.

Stellantis's own support schemes use the engine's production date, with belt failures covered on engines built up to June 2022. Belt engines made later still went into many models, so a 2023 car may have one. Sending your registration with a quote request lets the specialist separate them.

Every car whose 1.2 uses a belt

Each row links to a page on that model's versions, how to confirm the engine and what differs about the job.

BrandModelsEngine page
Peugeot208 and 2008208 and 2008 PureTech guide
Peugeot308, 3008 and 5008308, 3008 and 5008 guide
Peugeot108 (1.2 PureTech 82 only)Covered on this page
Peugeot408, Partner and RifterPeugeot wet belt guide
CitroënC3 and C3 AircrossC3 and C3 Aircross guide
CitroënC4, C4 Cactus and BerlingoC4 and Berlingo guide
CitroënC1 (1.2 PureTech 82 only)Covered on this page
CitroënC5 Aircross and C4 PicassoCitroën wet belt guide
DSDS 3, DS 3 Crossback, DS 4 and DS 7DS 3 and DS 7 guide
VauxhallCorsa and MokkaCorsa and Mokka guide
VauxhallCrossland X and Grandland XCrossland and Grandland guide
VauxhallAstra (2022 on)Astra 1.2 Turbo guide
VauxhallCombo Life and Combo CargoVauxhall wet belt guide
JeepAvenger petrol, before the 2026 updateJeep Avenger guide

The 108 and C1 were sold with the non-turbo 1.2 PureTech 82 from 2014 until about 2020. Their 1.0 is a Toyota engine with a timing chain, so only the 1.2 needs a belt change.

Known 1.2 PureTech engine problems

Most faults on this engine trace back to the oil, and they tend to show up together.

  • Fuel in the oil. Unburnt petrol thins the oil, mostly on cars doing short trips, and the thinned oil softens the belt.
  • Belt debris. A softened belt swells and sheds fragments that collect on the oil pump strainer and starve the engine of pressure.
  • Brake vacuum pump blockage. Debris can also reach the vacuum pump, which leaves the brake pedal feeling hard.
  • High oil use. Stellantis lists piston ring wear on turbo engines built before mid-2018 and oil separator faults on later ones.

Belt problems on this engine are covered in more depth in our PureTech wet belt guide.

What the belt job involves on a 1.2 PureTech

The procedure is broadly the same across every brand, though access changes from car to car.

Locking the engine in time

The camshafts and crankshaft are held with PureTech-specific locking tools before the old belt comes off. Without them the timing can slip by a tooth.

Belt, tensioner and crank bolt

A new belt kit goes on with its tensioner. Garages also replace parts the manufacturer says can't be reused, such as the crank pulley bolt. Beyond that, the parts list differs from garage to garage, so ask when they ring.

Checking for debris

If the old belt has started to break up, the sump comes off so the strainer can be cleaned. That's part of the standard strainer check in every quote through our network, and the garage explains what it found.

Fresh oil to the right approval

The engine is refilled with oil to the approval in your handbook, which matters more on this engine than on most.

The 1.2 PureTech interval since launch

  1. At launch (2012 to 2014). Service books gave the belt up to 10 years, with mileage figures from 175,000 km upwards depending on the source.
  2. After the failures. The usual interval came down to 6 years or 62,000 miles (100,000 km), whichever comes first, and that's the guide to work to today.
  3. At every service. Belt width is now meant to be gauged through the oil filler cap, so a worn belt can be caught early.
  4. For low-mileage cars. Parts makers advise a yearly oil change where a car covers fewer than about 9,000 miles a year.

1.2 PureTech engine questions

Is the 1.2 PureTech a reliable engine?

It's a strong performer for its size, but the belt-in-oil generations need closer care than most small petrols. Kept on the correct oil, serviced on time and given a new belt at the revised interval, plenty reach high mileages.

How can I tell which generation my 1.2 PureTech is?

Hybrid badging means a chain on these cars. For non-hybrids, the engine code on the V5C or a parts lookup gives it away, and an EB2LTED or a 2026 Turbo 100 has a chain. The specialist confirms it from the registration on your quote request.

Does Vauxhall's 1.2 Turbo use the same engine?

Yes. Vauxhall badges the PureTech as the 1.2 or 1.2 Turbo in the Corsa, Astra, Mokka, Crossland, Grandland and Combo, and the belt, tools and interval are the same as on a Peugeot.

Which 1.2 PureTech outputs have a turbo?

The 100, 110, 130 and 155 PS versions are turbocharged. The 68, 72, 75, 82 and 83 PS versions are naturally aspirated, and all of them still run a belt in oil.

Are the newer 1.2 PureTech engines any better?

The generation three engines from 2023 use a timing chain, which takes the wet belt out of the picture. For a belt engine built after June 2022, a dealer can check the build date by VIN and tell you what cover applies.

Book a 1.2 PureTech belt change

Put in the registration and postcode, and we'll pass the car to the approved garage covering that area, which will quote for your exact engine.

Get my free quote