MR.WET BELT

Peugeot 208 wet belt replacement in Carlisle

Get my free quote →

Send your Peugeot 208's reg from Carlisle for a wet belt replacement quote from an approved garage. A first-generation 208 with the 1.0 VTi 68 or 1.0 PureTech 68 has the smaller EB0 engine, and that one keeps its belt in oil as well.

Send my 208 details

Little 1.0 208 in Carlisle? I'll make sure the garage knows it's the EB0 before it quotes.

What to have ready for a 208 quote

The garage can quote with fewer follow-up questions if you have these to hand.

  • The registration, which tells the garage exactly which engine it has
  • Your postcode, as each area has its own approved garage
  • A rough mileage
  • Any invoice showing a past belt change, with its date
  • Any warning light, noise or oil loss you've noticed lately

Belt facts for the 208

VersionWhat turns the camshaftsWhen it's due
First-generation 208 (2012 to 2019) with the 1.0 VTi 68 or 1.0 PureTech 68The smaller EB0 PureTech, which also runs its belt in oilThe 1.0 follows the non-turbo 1.2's revised figure of 6 years or about 62,000 miles
First-generation 208 with a non-turbo 1.2 PureTech, 68 to 83 PSA rubber cam belt in the oil, on a different kit from the turbo 208s6 years or 100,000 km (about 62,000 miles), whichever comes first
First-generation 208 PureTech 110 turbo, from around 2015A cam belt running in oilEarly 208 books print a 10-year life, replaced since by the guide figure of 6 years or 62,000 miles
Second-generation 208 (2019 on), PureTech 75, 100 and 130A belt in oil on all three6 years or 62,000 miles, so a 2019 208 with no belt invoice is already past the age limit
208 48V Hybrid, sold in the UK from the 2024 facelift, and the 208 Turbo 100 from 2026A timing chain on both 208sNo wet belt on these 208s
208 GT and GTi with the 1.6 THPA chain on the four-cylinder THPOutside a 208 wet belt job
Early 208s sold with the older 1.4 and 1.6 petrolsNot the PureTech belt-in-oil engineSend the 208's reg with your quote request
Diesel 208, 1.6 HDi or 1.5 BlueHDiA dry timing belt, and the 1.5's known fault is its camshaft chainNot a 208 wet belt job
e-208Electric, with no timing belt at allNothing to change on an e-208

Engine history and what the job involves are in our full 208 belt guide.

Carlisle 208s and our Cumbria matching

We pass each Carlisle 208 to an approved garage by postcode, which is how we handle every Cumbria enquiry. We vetted that garage before it joined, and it uses the right tools for the three-cylinder PureTech. If you also run a Ford or a Vauxhall, try Carlisle wet belt quotes.

Other Carlisle wet belt pages

Peugeot 208 wet belt pages for other cities

Questions before you send your 208's reg

Do I need the service book before asking for a quote?

It helps, but the garage can start from a reg and postcode alone. It will ask about the history as part of its quote for your 208, so keep the book to hand if you can.

What if I don't know when the belt was last changed?

Put that on the form when you send it. With no invoice to prove a change, it's safest to treat the original belt as still fitted, and the garage can quote on that basis.

What interval applies to a 1.0 PureTech 208 in Carlisle?

The EB0 belt shares the 1.2's revised interval of 6 years or 62,000 miles, whichever comes first. Send the reg and mileage, and the garage will check where your 208 sits against it.

Get your Carlisle 208 quoted

Your reg, postcode and a rough mileage go in the form below. The approved garage covering you replies with a quote, and you choose whether the 208 goes in.

Send my 208 details