In Hereford, we can arrange a quote to replace the wet belt for your 3008 from an approved garage. A 3008 asks a lot of its three-cylinder 1.2 PureTech, and that weight makes fuel dilution of the oil around the belt more likely.
The garage can quote with fewer follow-up questions if you have these to hand.
| Version | What turns the camshafts | When it's due |
|---|---|---|
| First-generation 3008 (2009 to 2016), with the PureTech 130 added late in its life | A belt in oil on the late first-generation 3008 | 6 years or 100,000 km (about 62,000 miles), whichever is first, so every one of these 3008s is past it on age |
| First-generation 3008 with an older 1.6 petrol | Not the PureTech belt-in-oil engine | Send the 3008's reg with your quote request |
| Second-generation 3008 (2016 to 2024), PureTech 130 | A belt in oil, on the most common 3008 on the road | 6 years or 62,000 miles (100,000 km), though a 2017 3008's handbook shows a longer interval |
| Second-generation 3008, 1.6 PureTech 180 and the Hybrid and Hybrid4 plug-ins | A different 1.6 petrol engine from the 1.2 wet belt one | Outside a 3008 belt change |
| Third-generation 3008 (2024 on), Hybrid | A chain on the new 3008's hybrid engine | No wet belt on the new 3008 |
| e-3008 | An electric 3008 with no timing belt | Nothing to change on an e-3008 |
| Diesel 3008, 1.6 or 1.5 BlueHDi | A dry belt, and Stellantis's published fault on the 1.5 is its camshaft chain | Not a 3008 wet belt job |
Engine history and what the job involves are in our full 3008 belt guide.
Your Hereford postcode tells us which approved garage to send the 3008 to, as with all Herefordshire enquiries. We vet every garage so a 3008's PureTech belt is changed correctly. Other models from Hereford have their own Hereford page.
It helps, but the garage can start from a reg and postcode alone. It will ask about the history as part of its quote for your 3008, so keep the book to hand if you can.
Put that on the form when you send it. With no invoice to prove a change, it's safest to treat the original belt as still fitted, and the garage can quote on that basis.
A heavy load works the 1.2 harder, and that's one of the conditions in which fuel can thin the oil the belt runs in. Keeping oil changes on time, with Peugeot's approved grade, gives the belt its best chance.
The reg, a Hereford postcode and a rough mileage are what the garage starts with. It quotes for the belt, and you decide from there.