Your Oldham 3008 can get a wet belt replacement quote from one of our approved garages, worked out from the reg. Timing a 3008's PureTech means taking off the covers and air intake, then holding everything with locking tools.
Oldham 3008? Ask about the locking tools, and I already know the answer's yes.
These five cover most of what separates a thorough belt change from a rushed one.
| Question | What to hear on a 3008 |
|---|---|
| Parts | A belt kit matched to the 3008's engine code, with a new tensioner and crank pulley bolt for the 3008, and the garage lists anything else its kit includes |
| Oil | Peugeot's approval code written on the 3008's invoice, because the PureTech 130 is fussy about its specification |
| Tools | Covers and the air intake off first, then locking tools to hold the 3008's timing, and our vetting covers whether each garage uses the correct ones |
| Belt debris | Rubber caught in the strainer means dropping the 3008's sump to clean it, and that check and clean is standard on our network's quotes |
| Time | The bigger engine bay can make access easier, though a 3008 has more trim to remove first. It's usually back after one working day |
| Manufacturer cover | A 3008 whose 1.2 turbo was built April 2014 to June 2022, still under 10 years and 112,000 miles, goes to a Peugeot dealer for assessment before you pay |
Engine versions and cover terms are listed in the 3008's wet belt guide.
Oldham enquiries reach the approved garage covering the postcode, as they do across Greater Manchester. We vet every garage in our network, and each is approved to use the correct tools for the 3008. Oldham's questions about other makes go to Oldham's wet belt page.
When it calls you directly with the quote, which for most people is the same day. You aren't committed to anything at that point, so there's time to go through the list.
Ask each garage why. A shorter list can leave out a part that's needed anyway, so compare the lines before the totals.
Yes. The 3008's timing is held with locking tools while the belt is out, and we approve every garage in our network to use the correct ones. It's still worth asking, as a clear answer shows the job has been planned.
Send the reg and postcode, and the approved garage will explain its approach to the locking tools. Check its answers on tools and parts before you decide.