MR.WET BELT

Focus 1.0 EcoBoost wet belt guide

Get my free quote →

The Focus was the first car to get the 1.0 EcoBoost, back in 2012, and every 1.0 Focus since, Mk3 or Mk4, runs both of its engine belts in oil. Use the table below to place your car, then check when its belt is due. When you're ready, the reg and postcode get you a quote from a vetted garage.

Check my FocusGet a quote

Which Focus models have the 1.0 EcoBoost

GenerationYearsPowerCamshaft beltOil pump belt
Mk32012 to 2018100 and 125 PSIn oilIn oil
Mk42018 to 2025100 and 125 PSIn oilIn oil
Mk4 EcoBoost HybridAbout 2020 to 2025125 and 155 PSIn oilIn oil

Estate and hatchback versions of each generation share the same engine.

Mk3 or Mk4?

The Mk4 arrived in the second half of 2018, so a car registered that year could be either. A Ford dealer can confirm the generation from the VIN, and the specialist confirms the engine from the reg on your quote request.

The generation matters for parts and age more than for the belt itself. A Mk3 has the original 1.0, and a Mk4 has the revised engine or the Hybrid, but both run the camshaft belt in oil.

What's specific to the Focus

The first of the line

The earliest 1.0 EcoBoosts went into the 2012 Focus, so the oldest examples are now around 14 years old and well past any age limit Ford has set.

Automatic versions

Ford recalled US automatic Focus models from 2016 to 2018 over the oil pump belt tensioner. That recall doesn't cover UK cars. For open UK recalls on your Focus, enter the reg on the DVSA checker at gov.uk/check-vehicle-recall.

The same engine family as the C-Max

The Mk3 Focus and the C-Max use the same 1.0 engine family, so specialists know the job well on both.

Getting the Focus belt done on time

  1. Work out the age. On the Focus the belt was originally rated for 150,000 miles or ten years. The usual guide now is 10 years or 100,000 miles, whichever comes first, so check both the date and the odometer.
  2. Check the paperwork. Look for an invoice showing a belt change. No invoice means you should assume it's the factory belt.
  3. Get it quoted. Ask for both belts, both tensioners, new cover seals and oil to the approval in your handbook (WSS-M2C948-B on a Mk3).
  4. Book it with a vetted garage. Each garage in our network has passed our vetting and uses the correct tools for the 1.0.

Ford's figures for every engine are in our interval guide for Fords.

Focus 1.0 EcoBoost questions

Does the 2019 Focus 1.0 EcoBoost have a wet belt?

Yes. A 2019 car is a Mk4 with the revised 1.0, and it still turns its camshafts with a belt in oil, alongside the oil pump belt. The Mk4 Hybrid is the same.

Does the Focus ST-Line have a different engine?

ST-Line is a trim level, so a 1.0 ST-Line has the same EcoBoost and the same belts as other 1.0 models of its year. The Focus ST itself uses a larger engine.

Is the 1.5 Focus a wet belt car too?

No. The Mk3's four-cylinder 1.5 EcoBoost has a dry belt, and the Mk4's three-cylinder 1.5 doesn't have a wet belt either. Our guide to cars without a wet belt lists the Focus engines that run a dry belt or chain.

Have your Focus belt quoted

Share the reg and postcode, and an approved local specialist will quote for the 1.0 EcoBoost belt job on your Focus.

Get a quote