MR.WET BELT

Ford Puma timing belt or chain on the 1.0 EcoBoost

Get my free quote →

Every 1.0 EcoBoost Puma, Hybrid included, turns its camshafts with a timing belt that runs in the engine oil. Here's how that applies to each version, when the belt is due and how to confirm the engine in your car. Then send the Puma's reg and postcode, and an approved garage will quote you for the belt.

Check my PumaGet a quote

Belt or chain? On a 1.0 Puma it's a belt in oil. Give me the reg and I'll check yours.

Puma engines and their timing set-up

VersionYearsPowerCamshaftsOil pump
1.0 EcoBoost (non-hybrid)From 2019125 PSBelt in oilBelt in oil
1.0 EcoBoost HybridFrom 2019125 and 155 PSBelt in oilBelt in oil
Puma ST Powershift (1.0 Hybrid)From 2023170 PSBelt in oilBelt in oil
Puma ST (1.5 EcoBoost)From 2020200 PSTiming chain, according to parts suppliersNo wet belt
Puma Gen-EFrom 2025ElectricNo engineNo engine

The Puma ST with the three-cylinder 1.5 is covered in our 1.5 EcoBoost engine guide.

Why some guides say chain

Ford revised the 1.0 EcoBoost at around the time the Puma launched, and a number of guides assumed the update swapped the camshaft belt for a chain. It didn't, and the revised engine and the mild hybrid both kept the belt in oil.

The Puma also runs a second, narrower belt in the oil for the oil pump. Parts catalogues list it for the Puma Hybrid, so a 1.0 Puma has two belts that depend on clean oil.

What that means for a Puma owner

  • Oil quality decides how long the belts last, so stick to Ford's oil change intervals and the oil approval in your handbook.
  • The belt is due on age as well as mileage, so a low-mileage 2019 Puma still reaches the ten-year point in 2029.
  • An oil pressure warning means stop, even on a young car.
  • Short trips thin the oil with fuel, which is harder on a belt designed to live in it.

How to confirm your Puma's engine

  1. Send the reg with your quote request. The specialist confirms the engine fitted to your Puma.
  2. Check the V5C or badge. A 999cc petrol is the 1.0 EcoBoost, and an ST badge means either the 1.5 or the 1.0 Hybrid depending on the year.
  3. Ask for the engine code. It identifies the exact version, and your garage can confirm it from the reg.
  4. Book with a specialist when the belt is due. We only send Puma jobs to garages we've vetted, and they use the right tools for this engine.

Puma belt and chain questions

Does the Ford Puma Hybrid have a timing chain?

No. The 1.0 EcoBoost Hybrid uses a timing belt in oil for the camshafts and a smaller belt in oil for the oil pump. The 48-volt parts sit around the engine and don't replace either belt.

When does the Puma's belt need changing?

Ford first rated the 1.0 EcoBoost belt at 10 years or 150,000 miles, and the mileage has since been lowered, giving a guide of 10 years or 100,000 miles, whichever comes first. The Ford belt interval guide has the figures for every Ford engine.

Does the Puma ST have a wet belt?

It depends on the engine. The 170 PS ST Powershift has the 1.0 EcoBoost Hybrid, so it has the belt in oil. The 200 PS ST with the 1.5 EcoBoost doesn't have a wet belt.

Get the right answer and a quote

Send your Puma's reg and postcode, and a local 1.0 EcoBoost specialist will confirm the engine and quote for the belt change.

Get a quote