The 1.0 PureTech is the smallest member of Stellantis's three-cylinder family, and like the early 1.2 it runs its timing belt in oil. It was only ever fitted to a handful of cars, and several small cars badged 1.0 actually use a Toyota engine instead. For a 1.0 PureTech belt quote, enter the reg and your postcode below.
Check my engineGet my free quote
PSA's code for it is EB0. It's a 999cc naturally aspirated three-cylinder making 68 PS, sold first as the 1.0 VTi 68 and later as the 1.0 PureTech 68, and it shares its design and belt layout with the non-turbo 1.2.
Peugeot launched it in the 208 in 2012 as the entry engine, and Citroën added it to the C3 soon after. The 1.2 PureTech 68 later took over that slot.
Several small Stellantis and Toyota models were sold with a 1.0 petrol, and only two of them use the PureTech.
| Car | Badge | Engine | Timing |
|---|---|---|---|
| Peugeot 208 (2012 model) | 1.0 VTi 68 or 1.0 PureTech 68 | PSA EB0 | Belt in oil |
| Citroën C3 (second generation) | 1.0 VTi 68 or 1.0 PureTech 68 | PSA EB0 | Belt in oil |
| Peugeot 108 | 1.0 VTi 68 or 72 | Toyota 1KR-FE | Chain |
| Citroën C1 (2014 model) | 1.0 VTi 68 or 72 | Toyota 1KR-FE | Chain |
| Toyota Aygo and Aygo X | 1.0 VVT-i | Toyota 1KR-FE | Chain |
The 108 and C1 were also sold with the 1.2 PureTech 82, which uses a belt in oil. That engine is covered in our 1.2 PureTech engine hub, and our Toyota Aygo page covers the Aygo range.
The 1.0 shares its timing layout with the non-turbo 1.2, so the usual interval is the same guide of 6 years or 62,000 miles, whichever comes first. Every one is now old enough to be due without a belt invoice.
Stellantis includes the non-turbo 1.0 in its extended belt cover for engines produced from June 2012 to June 2022. Cover ends at 10 years from first registration, so most 1.0 PureTech cars are already outside it. Details are in our Peugeot recall guide.
A few quick checks tell the PSA engine apart from the Toyota one.
The job follows the same pattern as the 1.2, set out in more detail in our 1.2 PureTech guide.
The engine is locked with the PSA three-cylinder tool set, which covers the 1.0 and the 1.2.
A belt kit made for the non-turbo PureTech, with its tensioner, plus fresh oil to the approval in your handbook. The rest of the kit varies by garage, so check the list when they call.
On an older car the garage checks the oil for belt fragments, since debris on the pump strainer is the usual way these engines fail.
Yes. The EB0 1.0 PureTech, found in early 208 and C3 models, runs its timing belt in oil, just like the non-turbo 1.2. The usual guide is a new belt every 6 years or 62,000 miles, whichever comes first.
No. The 1.0 VTi in the 108 is Toyota's 1KR-FE, which uses a timing chain. Only the 108's 1.2 PureTech 82 has a belt in oil.
No, it's naturally aspirated. The turbocharged PureTech three-cylinders are all 1.2 litres, and Ford's 1.0 EcoBoost is a separate engine from another maker.
The engine falls inside the build window, but the cover runs for 10 years from first registration. A 2013 car is past that, so the belt change goes to a specialist instead.
Tell us the registration and postcode of the 208 or C3, and a local garage that knows the PureTech will come back with a quote.