Birmingham C3 petrols are quoted for wet belt replacement by the approved garage that covers your postcode. A C3 diesel uses a dry belt, so the C3s with a belt in oil are the 1.0 and 1.2 petrols from 2012 to 2024.
Birmingham C3? Send the reg and I'll find out if it's petrol or diesel.
The garage can quote with fewer follow-up questions if you have these to hand.
| Version | What turns the camshafts | When it's due |
|---|---|---|
| Second-generation C3 (2012 to 2016) with the 1.0 VTi 68 | The EB0 1.0 PureTech, with its belt in oil | Revised to 6 years or about 62,000 miles, the same as the non-turbo 1.2 |
| Second-generation C3 with the 1.2 VTi 82 or PureTech 110 | A C3 belt running in oil | At launch Citroën said the belt would last as long as the car. The guide figure today is 6 years or 62,000 miles (100,000 km), whichever comes first |
| Third-generation C3 (2016 to 2024), PureTech 68, 82, 83 and 110 | A belt in oil, with a turbo oil feed on the 110 only | 6 years or 100,000 km (about 62,000 miles), whichever comes first, so a C3 first registered in 2020 is at that point |
| Fourth-generation C3 (2024 on), 1.2 Turbo 100 and Hybrid 110 | A timing chain on both | No wet belt on the new C3 |
| Diesel C3, 1.6 HDi or 1.5 BlueHDi | A dry belt, with a cam chain on the 1.5 | Not a C3 wet belt job |
| ë-C3 | An electric C3 with no timing belt | Nothing due on an ë-C3 |
Engine history and what the job involves are in our full C3 belt guide.
We send every C3 enquiry from Birmingham to a vetted, approved garage covering the postcode, and the same goes for the rest of the West Midlands. Its quote for the belt comes to you directly. For a different make, use the Birmingham all-makes page.
It helps, but the garage can start from a reg and postcode alone. It will ask about the history as part of its quote for your C3, so keep the book to hand if you can.
Put that on the form when you send it. With no invoice to prove a change, it's safest to treat the original belt as still fitted, and the garage can quote on that basis.
No. The 1.6 HDi and 1.5 BlueHDi diesels use a dry belt, with a cam chain on the 1.5, so neither is a C3 wet belt job. The PureTech petrols are the ones to check.
Reg, Birmingham postcode and an idea of the mileage are all the garage needs to start. You decide what to do once its quote arrives.