Some do and some don't. Every 1.0 EcoBoost petrol Focus, Mk3 or Mk4, and the 2.0 EcoBlue diesel in the latest model run a timing belt in oil, while the other Focus engines use a dry belt or a chain. The registration tells you which you've got, and on a wet belt Focus the approved garage for your postcode will quote for the change.
Check my FocusGet my free quote
Three generations of Focus, a dozen engines. Give me your reg and I'll find yours.
The table covers the Focus engines sold in the UK since 2005. The last column is the one that matters: a belt sitting in the engine oil is what needs watching.
| Engine | Focus generation | Camshafts turned by | Belt in oil? |
|---|---|---|---|
| 1.0 EcoBoost petrol | Mk3, 2012 to 2018 | Timing belt | Yes. The cam belt and a smaller oil pump belt both run in oil |
| 1.0 EcoBoost and 1.0 EcoBoost Hybrid | Mk4, 2018 to 2025 | Timing belt | Yes. The cam belt and the oil pump belt both sit in the oil |
| 1.5 EcoBoost three-cylinder | Mk4, 2018 to 2025 | Timing chain, according to parts suppliers | No |
| 1.5 and 1.6 EcoBoost four-cylinder | Mk3, 2011 to 2018 | Timing belt | No, both have a dry belt |
| 2.0 EcoBlue diesel | Mk4, 2018 to 2025 | Timing belt | Yes |
| 1.5 EcoBlue diesel | Mk4, 2018 to 2025 | Timing belt | No, it's a dry belt outside the engine |
| 1.5, 1.6 and 2.0 TDCi diesel | Mk3, 2011 to 2018 | Timing belt | No, these are dry belts |
| 1.8 TDCi diesel | Mk1 and Mk2, up to 2011 | Timing belt | No. The cam belt is dry, with only a small fuel pump belt in oil |
| 2.0 and 2.3 EcoBoost (ST and RS) | Mk3 and Mk4 | Timing chain | No |
For the engine history in more depth, see the pages on the Focus 1.0 EcoBoost and the Focus 2.0 EcoBlue. The 1.5 EcoBoost petrols are in our guide to cars without a wet belt.
Two Focus engines need a planned belt change, and the paperwork below helps you get it right.
On the 1.0 EcoBoost, Ford first set 10 years or 150,000 miles, and the figure to go by now is 10 years or 100,000 miles. The 2.0 EcoBlue Focus is due at 6 years or 100,000 miles as a guide, and Ford's intervals by model has the rest.
A Ford Focus wet belt replacement cost comes down to the engine, the hours that version needs and the garage's labour rate. Our guide to wet belt costs shows what a complete quote lists.
Where a belt has failed early, Ford can consider support through a dealer if the car has full service history. Our Ford recall explainer sets out what's on offer.
The same EcoBoost badge sits on Focus models with very different engines inside. A 1.0 from any year has its camshaft belt in oil, yet a Mk4 with the three-cylinder 1.5 has no wet belt at all.
The diesels cause a similar mix-up. Plenty of websites list the 1.5 EcoBlue as a wet belt engine, but it uses a dry belt on its own schedule. It's the bigger 2.0 EcoBlue that has the belt in oil.
No. Two Focus engines run a timing belt in oil, the 1.0 EcoBoost (including the Hybrid) and the 2.0 EcoBlue diesel. The 1.5 petrols and the other diesels don't.
The three-cylinder 1.5 EcoBoost in the Mk4, sold from 2018, has a timing chain, according to parts suppliers. The 1.0 EcoBoost never switched, and the petrol ST and RS performance models use chains too.
Send the registration with your quote request and the specialist will confirm it, or ring a Ford dealer with the VIN, which you can read through the base of the windscreen. The engine code on an old service invoice also does the job.
Find out which engine it has first. If it's a 1.0 EcoBoost of any year or a 2.0 EcoBlue, and there's no invoice showing a belt change, treat the belt as original and get it quoted.
Yes. The 1.0 EcoBoost Hybrid, sold from 2020, runs its camshaft belt in oil like every other 1.0, along with a small oil pump belt. Oil changes with Ford's specified grade matter just as much on the Hybrid.
Give us the registration and postcode, and we'll confirm if the car has a wet belt. If it does, a local specialist we've vetted will send a quote for the job.