Nearly every petrol 208 and 2008 built since 2012 has a 1.2 PureTech with its timing belt running in oil. The exceptions are the hybrids, the new Turbo 100 and a few older performance models, and the table below sorts them out. Once you know the engine, send the reg and postcode for a quote from an approved garage.
Check my PeugeotGet my free quote
| Model | Belt in oil | Chain |
|---|---|---|
| 208, first generation (2012 to 2019) | 1.0 VTi 68, 1.2 PureTech 68 to 83, PureTech 110 | 1.6 THP in the GT and GTi |
| 208, second generation (2019 on) | PureTech 75, 100 and 130 | Hybrid from the 2024 facelift, and the Turbo 100 from 2026, so check a recent car by its reg |
| 2008, first generation (2013 to 2019) | PureTech 82, 110 and 130 | None in the PureTech range |
| 2008, second generation (2019 on) | PureTech 100, 130 and 155 | Later hybrid versions, and the Turbo 100 from 2026 |
The early 208's 1.0 is the smaller EB0 engine, with its own 1.0 PureTech engine guide. The e-208 and e-2008 are electric and have no belt.
The usual interval for both is the revised 1.2 PureTech guide of 6 years or 62,000 miles (100,000 km), whichever comes first. Early 208s left the factory with a 10-year figure in the book, so many have already passed the newer limit.
A second-generation 208 or 2008 with an engine built before July 2022 may still sit inside Stellantis's extended cover. Have a Peugeot dealer check before paying for the work, using our Peugeot recall guidance.
These details change the job compared with other PureTech cars.
First-generation cars use PSA's older small-car platform, while 2019-on cars share the CMP platform, so a garage plans each one differently.
Between them, the 208 and 2008 were sold with almost every PureTech output, from 68 to 155 PS, and the non-turbo and turbo engines take different kits.
Plenty of 208s are town cars doing a few miles at a time, the pattern that dilutes the oil fastest. Expect the garage to look closely at the oil and strainer on these.
Petrol 208s with a PureTech engine have a belt in oil, apart from the Hybrid models and the Turbo 100 introduced in 2026, which have a chain. The old 208 GTi's 1.6 THP also uses a chain.
Every petrol 2008 built before the Hybrid and the 2026 Turbo 100 has a 1.2 PureTech timing belt that runs in oil.
The engines are shared, so a 2008 PureTech 130 takes the same belt kit as a 208 PureTech 130. A non-turbo 208 needs a different kit, which is why the engine code matters.
Common faults and what Peugeot covers are on the 208 model page and the 2008 model page, with engine background in our PureTech 1.2 hub.
Pop in the registration and postcode. The postcode tells us which approved garage covers you, and that garage sends a quote for your 208 or 2008's belt.