MR.WET BELT

The wet timing belt explained

Get my free quote →

A wet timing belt does the same job as any cambelt, keeping the valves in step with the pistons, but it runs inside the engine in oil. You'll also see it called a wet cambelt, a wet cam belt or a belt in oil.

Check my carGet my free quote

One part with several names

Wet belt, wet timing belt, wet cambelt and belt in oil all describe the same part. UK garages tend to say cambelt, manufacturers say timing belt, and belt suppliers such as Dayco call it a belt in oil, or BIO.

Some engines have two belts in the oil. Alongside the timing belt there's a smaller belt that turns the oil pump, and it's replaced at the same time.

Wet belt vs timing belt

A wet belt is a timing belt. What separates it from a conventional dry belt is where it runs, and that changes how it wears and how it fails. A timing chain is included for comparison.

Wet timing beltDry timing beltTiming chain
Where it runsInside the engine, in oilOutside the engine, behind a coverInside the engine, lubricated by oil
What wears itHeat, flexing and the condition of the oilHeat, flexing and ageStretch over high mileage
Can you see it?Not without removing covers, and on some engines the sumpOften, with the top cover offNot usually
When it's replacedAt a set interval in years or milesAt a set interval in years or milesUsually only when it's worn or noisy
How it failsSheds debris that can block the oil pickup, or snapsStrips teeth or snapsStretches and rattles, and can jump timing if neglected
ExamplesFord 1.0 EcoBoost, Ford 2.0 EcoBlue, 1.2 PureTechVolkswagen 2.0 TDI, Ford 1.5 EcoBlue, Peugeot and Citroën 1.5 and 1.6 BlueHDiToyota's 1.0 in the Aygo, 108 and C1, updated mild hybrid 1.2 PureTech from 2023

Why engines use a belt in oil

Running the belt in oil cuts friction. Suppliers quote up to 30% less friction loss than a chain or dry belt, worth just over 1% in fuel economy, and a belt runs more quietly than a chain.

It also lets the engine be shorter and lighter, which suited the small turbo petrols of the last decade. The trade-off is that the belt now lasts only as long as the oil around it stays in good condition.

Where you'll find a wet timing belt

These are the engine families most often fitted with one. There's a full list in our guide to wet belt engines.

Ford 1.0 EcoBoost petrol

Every version in the Fiesta, Focus, Puma, EcoSport, B-Max and C-Max, from the 2012 original to the later mild hybrid. See our EcoBoost wet belt guide.

Ford EcoBlue diesel

The 2.0 EcoBlue in the Transit, Transit Custom and Ranger. On the Transit and Transit Custom, Ford has cut the belt interval to 6 years or 100,000 miles. Read more on the 2.0 EcoBlue diesel.

Stellantis 1.2 PureTech

The three-cylinder petrol shared by Peugeot, Citroën, Vauxhall and DS. See what goes wrong with PureTech belts.

Honda 1.0 VTEC Turbo

The small turbo petrol in the tenth-generation Civic, sold as a hatchback from 2017 to 2021 and a saloon in 2020. See Honda's 1.0 VTEC Turbo.

Wet timing belt replacement

On most engines a wet timing belt takes longer to change than a dry one. The oil has to come out, and more of the engine has to be stripped to reach the belt. Our guide to what happens during a belt change covers each stage of the job.

Go by the manufacturer's current interval in years or miles, whichever arrives first. Some intervals have been shortened since launch, so an older service book may be out of date. What goes into the price, and how to compare quotes, is explained in our wet belt cost guide.

Get my free quote

How to tell which belt your car has

The engine code decides it, and two cars of the same model can differ.

  • Send your registration with a quote request, and the specialist will tell you
  • Find the engine name or code in the service book, then look it up in our engine and model list
  • Look at the service schedule in the handbook, since a chain usually has no replacement interval listed
  • Ask a dealer or specialist to check against the VIN

Wet timing belt questions

Is a wet belt a timing belt?

Yes. It's a timing belt that runs inside the engine in oil instead of behind an outer cover. It has the same job of keeping the camshafts and crankshaft in time, and it needs replacing at a set interval just like a dry belt.

What does belt in oil mean?

It's the parts industry's name for a wet belt, often shortened to BIO. Suppliers such as Dayco and Continental make belts designed to run in engine oil for their whole service life, which a conventional dry belt isn't built to do.

Is a wet timing belt worse than a timing chain?

It has more to go wrong if it's neglected, because old or diluted oil attacks it and the debris can starve the engine of oil. Looked after properly, it runs with less friction and less noise. A chain usually lasts the life of the engine without a scheduled change.

Do diesel engines have wet timing belts?

Some do. Ford's 2.0 EcoBlue diesel in the Transit, Transit Custom and Ranger uses one, along with a separate oil pump belt. Many other diesels, the Ford 1.5 EcoBlue and the 1.5 BlueHDi among them, use a dry belt or a chain, so send the reg with a quote request and the specialist will check your engine.

Can I check a wet cambelt myself?

Not really. The belt is sealed inside the engine, and on most cars it can't be seen without removing covers, though on a 1.2 PureTech a garage can measure its width through the oil filler at a service. Otherwise, the service history is the best guide.

Book your wet timing belt replacement

Send us the registration and postcode, and an approved local garage will confirm whether the engine has a wet timing belt, then quote for the change before anything is booked. Asking for that quote costs you nothing.

Get my free quote